AES 5501-ISO7637汽車傳導測試系統是**貼合ISO 7637-2 發射測試的解決方案
*可靠的100A電流，具有極低的電壓壓降
AES 5501-ISO7637汽車傳導測試系統支持大多數工業標準繼電器（隨機提供1個30A和1個100A的繼電器）
AES 5501-ISO7637汽車傳導測試系統獨立的控制站可以自動、手動、或者外部觸發等多種模式控制開關動作
AES 5501-ISO7637汽車傳導測試系統更小尺寸開關滿足不同線纜長度的需要
AES 5501-ISO7637汽車傳導測試系統全新設計升級的人工電源網絡，*標準要求的阻抗曲線
AES 5501-ISO7637汽車傳導測試系統英文資料：
The AES 5501 is a system of electronic and mechanical switches, an arti? cial network, and a unique
control station designed for emissions testing to ISO 7637-2. Having gone through meticulous develop-
ment and intensive beta testing, the AES 5501 contains unique features and uncompromising quality
and conformity found nowhere else. Consisting of a four-part solution, the user has complete control
over where, when and how the switches can be placed and controlled, including the necessary drive
voltages for the relays.
The 100 A connectors are carefully placed and countersunk to allow precise cabling between the
switches, the arti? cial network and test bench and allows for the electronic or mechanic switches to be
placed at any point before or after the arti? cial network. Multiple switches may also be utilized at the
same time as required. This careful attention to detail for switch placement and cable length means
that numerous manufacturer standards can also be met. The AES 5501 features a rugged construction
with unpainted underside for good earth contact, precise switching control and numerous monitoring
locations. A counter for the relay and LED indicators for both electronic and mechanical switches are pro-
vided. The AES 5501 has temperature controlled fans for quiet operation and a thermal shutdown feature.
 The only complete, compliant
solution for ISO 7637-2 emissions
testing
 Clean, reliable 100 A operation
with very low voltage drop
 Industry standard relay footprint
for a wide selection of relays
（one 100 A relay included）
 Separate control station with au-
tomatic, manual or external trig-
gering of the switching behavior
 Smaller switch enclosure for
easier compliance to various
cable-length requirements
 Totally redesigned AN with
improved, fully compliant imped-
ance curve
 Convenient measurement ports
Technical specifications
Complete system
1）
Battery current   100 A
Inrush current
2）
   300 A for 200 ms
Battery voltage   0 to 60 VDC
Shunt resistor （RS
）   10, 20, 40, 120 Ω, Ext.
Trigger modes   External, internal, manual
Battery off time （t
off
）   10 ms – 10 s ±（10% + 10 ms）
Battery on time （t
on
）   0.5 ms – 10.5 s ±（10% + 10 ms）
Mains input voltage   85 – 264 VAC, 47 – 63 Hz
Available relay voltage  12, 24, 36 V （for 42 V applications）
Electronic switch
Switching time Δt
S
   300 ns ±20%
3）
Voltage drop   <1 V @ 25 A
 Typical 2.1 V @ 100 A
Transient voltage protection  440 V
Mechanical switch
Type   Automotive relay
Contacts   High purity AgNi with no suppression across contacts
Voltage rating   > 400 V
Arti? cial network
Inductance   5 µH
Capacitance   0.1 µF
Resistance   50 Ω
Impedance   As per ISO 7637-2 （see above impedance curve）
Connectors   100 A MC type, countersunk, 50 mm above ground plane
Housing   Stainless steel, unpainted underside, screw terminal and
 earth connections
Indicators   Counter on relay, LED indicator on controller for mechanical
 and electronic switches
Measurements ports   MS 5501, ES 5501 - directly connected to output
 AN 5501 – 5.6 k output impedance （to output connector –
 necessary for improved RF performance）
Physical dimensions （L x W x H）  ES 5501  125 x 125 x 125 mm
 MS 5501  125 x 125 x 125 mm
 AN 5501  340 x 270 x 205 mm
All tolerances ± 10% unless otherwise noted.