您好, 歡迎來到化工儀器網
ASTM C1442-14測試標準
本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM C1442-14標準詳細信息或ASTM C1442-14具體測試方法，與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
ASTM C1442-14標準介紹
ASTM C1442主要是針對使用人工老化設備對密封劑進行測試的方法：
本測試方法包括三種實驗室加速老化曝露程序，評估太陽光輻射、熱和潮濕對密封劑的影響。
ASTM C1442-14英文版本（節選）
1. Scope
1.1 This practice covers three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants.
1.2 The exposure sources used in the three types of artificial weathering devices are the filtered xenon arc, fluorescent ultraviolet lamps, and open flame carbon arc based on Practices G155, G154, and G152, respectively.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.
1.4 The ISO standard related to this Practice is ISO 11431. Significant differences exist between the procedures. The ISO specimens are exposed through glass and are elongated prior to examination for loss of adhesion or cohesion, or both, following exposure.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ISO Standard
ISO 11431 Building Construction--Sealants: Determination of Adhesion/Cohesion Properties After Exposure to Heat and Artificial Light Through Glass and to Moisture Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.
ASTM Standards
C717 Terminology of Building Seals and Sealants
G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G141 Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
G147 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G152 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
Q-sun氙燈試驗箱ASTM C1442-03的測試方法
[Q-sun氙燈符合ASTM C1442的型號及設置方法]
▼ASTM C1442-14第三方檢測機構
以上標準信息來自互聯網搜索整理，如需了解完整的ASTM C1442-14的信息或ASTM C1442-14標準解讀，歡迎詳詢。