您好, 歡迎來到化工儀器網
ASTM D518-99測試標準
本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM D518-99標準詳細信息或ASTM D518-99具體測試方法，歡迎與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
ASTM D518-99標準介紹
ASTM D518-99簡介
ASTM D518標準是關于橡膠變質以及表面開裂的測試標準，目前該標準已經被棄用取而代之的是ASTM D1149 - 16，如需標準信息請咨詢客服人員。
1. Scope
1.1 This test method covers three test specimen procedures that estimate the comparative ability of rubber compounds to withstand the effects of normal weathering, or exposure in an atmosphere containing controlled amounts of ozone. It does not apply to testing of electrical insulation or other rubber parts where high concentrations of ozone prevail due to electrical discharge, nor to testing of material ordinarily classified as hard rubber.
1.2 The values stated in SI units are to be regarded as the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
▼ASTM D518-99第三方檢測機構
以上標準信息來自互聯網搜索整理，如需了解完整的ASTM D518-99的信息或ASTM D518-99標準解讀，歡迎詳詢。