General information

Hardware product version

01

Firmware version

V3.2

Engineering with

• ● Programming package

STEP 7 V5.5 or higher

Supply voltage

Rated value (DC)

• ● 24 V DC

Yes

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

external protection for power supply lines (recommendation)

2 A min.

Mains buffering

• ● Mains/voltage failure stored energy time

5 ms

• ● Repeat rate, min.

1 s

Input current

Current consumption (rated value)

750 mA

Current consumption (in no-load operation), typ.

150 mA

Inrush current, typ.

4 A

I²t

1 A²·s

Power loss

Power loss, typ.

4.65 W

Memory

Work memory

• ● integrated

384 kbyte

• ● expandable

No

• ● Size of retentive memory for retentive data blocks

128 kbyte

Load memory

• ● Plug-in (MMC)

Yes

• ● Plug-in (MMC), max.

8 Mbyte

• ● Data management on MMC (after last programming), min.

10 y

Backup

• ● present

Yes; Guaranteed by MMC (maintenance-free)

• ● without battery

Yes; Program and data

CPU processing times

for bit operations, typ.

0.05 µs

for word operations, typ.

0.09 µs

for fixed point arithmetic, typ.

0.12 µs

for floating point arithmetic, typ.

0.45 µs

CPU-blocks

Number of blocks (total)

1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.

DB

• ● Number, max.

1 024; Number range: 1 to 16000

• ● Size, max.

64 kbyte

FB

• ● Number, max.

1 024; Number range: 0 to 7999

• ● Size, max.

64 kbyte

FC

• ● Number, max.

1 024; Number range: 0 to 7999

• ● Size, max.

64 kbyte

OB

• ● Size, max.

64 kbyte

• ● Number of free cycle OBs

1; OB 1

• ● Number of time alarm OBs

1; OB 10

• ● Number of delay alarm OBs

2; OB 20, 21

• ● Number of cyclic interrupt OBs

4; OB 32, 33, 34, 35

• ● Number of process alarm OBs

1; OB 40

• ● Number of DPV1 alarm OBs

3; OB 55, 56, 57

• ● Number of isochronous mode OBs

1; OB 61

• ● Number of startup OBs

1; OB 100

• ● Number of asynchronous error OBs

6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)

• ● Number of synchronous error OBs

2; OB 121, 122

Nesting depth

• ● per priority class

16

• ● additional within an error OB

4

Counters, timers and their retentivity

S7 counter

• ● Number

256

Retentivity

• — adjustable

Yes

• — lower limit

0

• — upper limit

255

• — preset

Z 0 to Z 7

Counting range

• — can be set

Yes

• — lower limit

0

• — upper limit

999

IEC counter

• ● Number

Unlimited (limited only by RAM capacity)

S7 times

• ● Number

256

Retentivity

• — adjustable

Yes

• — lower limit

0

• — upper limit

255

• — preset

No retentivity

Time range

• — lower limit

10 ms

• — upper limit

9 990 s

IEC timer

• ● present

Yes

• ● Type

SFB

• ● Number

Unlimited (limited only by RAM capacity)

Data areas and their retentivity

retentive data area in total

All, 128 KB max.

Flag

• ● Number, max.

2 048 byte

• ● Retentivity available

Yes; MB 0 to MB 2047

• ● Retentivity preset

MB 0 to MB 15

• ● Number of clock memories

8; 1 memory byte

Data blocks

• ● Number, max.

1 024; Number range: 1 to 16000

• ● Size, max.

64 kbyte

• ● Retentivity adjustable

Yes; via non-retain property on DB

• ● Retentivity preset

Yes

Local data

• ● per priority class, max.

32 768 byte; Max. 2048 bytes per block

Address area

I/O address area

• ● Inputs

2 048 byte

• ● Outputs

2 048 byte

of which distributed

• — Inputs

2 048 byte

• — Outputs

2 048 byte

Process image

• ● Inputs

2 048 byte

• ● Outputs

2 048 byte

• ● Inputs, adjustable

2 048 byte

• ● Outputs, adjustable

2 048 byte

• ● Inputs, default

128 byte

• ● Outputs, default

128 byte

Subprocess images

• ● Number of subprocess images, max.

1; With PROFINET IO, the length of the user data is limited to 1600 bytes

Digital channels

• ● Inputs

16 384

• — of which central

1 024

• ● Outputs

16 384

• — of which central

1 024

Analog channels

• ● Inputs

1 024

• — of which central

256

• ● Outputs

1 024

• — of which central

256

Hardware configuration

Number of expansion units, max.

3

Number of DP masters

• ● integrated

1

• ● via CP

4

Number of operable FMs and CPs (recommended)

• ● FM

8

• ● CP, PtP

8

• ● CP, LAN

10

Rack

• ● Racks, max.

4

• ● Modules per rack, max.

8

Time of day

Clock

• ● Hardware clock (real-time)

Yes

• ● retentive and synchronizable

Yes

• ● Backup time

6 wk; At 40 °C ambient temperature

• ● Deviation per day, max.

10 s; Typ.: 2 s

• ● Behavior of the clock following POWER-ON

Clock continues running after POWER OFF

• ● Behavior of the clock following expiry of backup period

Clock continues to run with the time at which the power failure occurred

Operating hours counter

• ● Number

1

• ● Number/Number range

0

• ● Range of values

0 to 2^31 hours (when using SFC 101)

• ● Granularity

1 hour

• ● retentive

Yes; Must be restarted at each restart

Clock synchronization

• ● supported

Yes

• ● to MPI, master

Yes

• ● to MPI, slave

Yes

• ● to DP, master

Yes; With DP slave only slave clock

• ● to DP, slave

Yes

• ● in AS, master

Yes

• ● in AS, slave

Yes

• ● on Ethernet via NTP

Yes; As client

Digital inputs

Number of digital inputs

0

Digital outputs

Number of digital outputs

0

Analog inputs

Number of analog inputs

0

Analog outputs

Number of analog outputs

0

Interfaces

Number of industrial Ethernet interfaces

1; 2 ports (switch) RJ45

Number of RS 485 interfaces

1; Combined MPI / PROFIBUS DP

Number of RS 422 interfaces

0

1. Interface

Interface type

Integrated RS 485 interface

Physics

RS 485

Isolated

Yes

Power supply to interface (15 to 30 V DC), max.

200 mA

Functionality

• ● MPI

Yes

• ● PROFIBUS DP master

Yes

• ● PROFIBUS DP slave

Yes

• ● Point-to-point connection

No

MPI

• ● Transmission rate, max.

12 Mbit/s

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — Global data communication

Yes

• — S7 basic communication

Yes

• — S7 communication

Yes

• — S7 communication, as client

No; but via CP and loadable FB

• — S7 communication, as server

Yes

DP master

• ● Transmission rate, max.

12 Mbit/s

• ● Number of DP slaves, max.

124

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — Global data communication

No

• — S7 basic communication

Yes; I blocks only

• — S7 communication

Yes

• — S7 communication, as client

No

• — S7 communication, as server

Yes

• — Equidistance

Yes

• — Isochronous mode

Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO

• — SYNC/FREEZE

Yes

• — Activation/deactivation of DP slaves

Yes

• — Number of DP slaves that can be simultaneously activated/deactivated, max.

8

• — Direct data exchange (slave-to-slave communication)

Yes; As subscriber

• — DPV1

Yes

Address area

• — Inputs, max.

2 kbyte

• — Outputs, max.

2 kbyte

User data per DP slave

• — Inputs, max.

244 byte

• — Outputs, max.

244 byte

DP slave

• ● Transmission rate, max.

12 Mbit/s

• ● automatic baud rate search

Yes; only with passive interface

• ● Address area, max.

32

• ● User data per address area, max.

32 byte

Services

• — PG/OP communication

Yes

• — Routing

Yes; Only with active interface

• — Global data communication

No

• — S7 basic communication

No

• — S7 communication

Yes

• — S7 communication, as client

No

• — S7 communication, as server

Yes; Connection configured on one side only

• — Direct data exchange (slave-to-slave communication)

Yes

• — DPV1

No

Transfer memory

• — Inputs

244 byte

• — Outputs

244 byte

2. Interface

Interface type

PROFINET

Physics

Ethernet RJ45

Isolated

Yes

automatic detection of transmission rate

Yes; 10/100 Mbit/s

Autonegotiation

Yes

Autocrossing

Yes

Change of IP address at runtime, supported

Yes

Interface types

• ● Number of ports

2

• ● integrated switch

Yes

Media redundancy

• ● supported

Yes

• ● Switchover time on line break, typ.

200 ms; PROFINET MRP

• ● Number of stations in the ring, max.

50

Functionality

• ● MPI

No

• ● PROFINET IO Controller

Yes; Also simultaneously with IO-Device functionality

• ● PROFINET IO Device

Yes; Also simultaneously with IO Controller functionality

• ● PROFINET CBA

Yes

• ● PROFIBUS DP master

No

• ● PROFIBUS DP slave

No

• ● Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

• ● Web server

Yes

• — Number of HTTP clients

5

PROFINET IO Controller

• ● Transmission rate, max.

100 Mbit/s

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — S7 communication

Yes; With loadable FBs, max. configurable connections: 14, max. number of instances: 32

• — Isochronous mode

Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO

• — Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

• — IRT

Yes

• — Shared device

Yes

• — Prioritized startup

Yes

• — Number of IO devices with prioritized startup, max.

32

• — Number of connectable IO Devices, max.

128

• — Of which IO devices with IRT, max.

64

• — of which in line, max.

64

• — Number of IO Devices with IRT and the option "high flexibility"

128

• — of which in line, max.

61

• — Number of connectable IO Devices for RT, max.

128

• — of which in line, max.

128

• — Activation/deactivation of IO Devices

Yes

• — Number of IO Devices that can be simultaneously activated/deactivated, max.

8

• — IO Devices changing during operation (partner ports), supported

Yes

• — Number of IO Devices per tool, max.

8

• — Device replacement without swap medium

Yes

• — Send cycles

250 μs, 500 μs,1 ms; 2 ms, 4 ms (not in the case of IRT with "high flexibility" option)

• — Updating time

250 µs to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, Technical Data" for more details)

Address area

• — Inputs, max.

2 kbyte

• — Outputs, max.

2 kbyte

• — User data consistency, max.

1 024 byte

PROFINET IO Device

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — S7 communication

Yes; With loadable FBs, max. configurable connections: 14, max. number of instances: 32

• — Isochronous mode

No

• — Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

• — IRT

Yes

• — PROFIenergy

Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device

• — Shared device

Yes

• — Number of IO Controllers with shared device, max.

2

Transfer memory

• — Inputs, max.

1 440 byte; Per IO Controller with shared device

• — Outputs, max.

1 440 byte; Per IO Controller with shared device

Submodules

• — Number, max.

64

• — User data per submodule, max.

1 024 byte

PROFINET CBA

• ● acyclic transmission

Yes

• ● cyclic transmission

Yes

Open IE communication

• ● Number of connections, max.

8

• ● Local port numbers used at the system end

0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535

• ● Keep-alive function, supported

Yes

Protocols

Open IE communication

• ● TCP/IP

• — Number of connections, max.

8

• — Data length for connection type 01H, max.

1 460 byte

• — Data length for connection type 11H, max.

32 768 byte

• — several passive connections per port, supported

Yes

• ● ISO-on-TCP (RFC1006)

Yes; via integrated PROFINET interface and loadable FBs

• — Number of connections, max.

8

• — Data length, max.

32 768 byte

• ● UDP

• — Number of connections, max.

8

• — Data length, max.

1 472 byte

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes; Via PROFIBUS DP or PROFINET interface

Communication functions

PG/OP communication

Yes

Data record routing

Yes

Global data communication

• ● supported

Yes

• ● Number of GD loops, max.

8

• ● Number of GD packets, max.

8

• ● Number of GD packets, transmitter, max.

8

• ● Number of GD packets, receiver, max.

8

• ● Size of GD packets, max.

22 byte

• ● Size of GD packet (of which consistent), max.

22 byte

S7 basic communication

• ● supported

Yes

• ● User data per job, max.

76 byte

• ● User data per job (of which consistent), max.

76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)

S7 communication

• ● supported

Yes

• ● as server

Yes

• ● as client

Yes; via integrated PROFINET interface and loadable FB or via CP and loadable FB

• ● User data per job, max.

See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)

S5 compatible communication

• ● supported

Yes; via CP and loadable FC

Open IE communication

• ● TCP/IP

Yes; via integrated PROFINET interface and loadable FBs

• ● UDP

Yes; via integrated PROFINET interface and loadable FBs

Web server

• ● supported

Yes

• ● Number of HTTP clients

5

• ● User-defined websites

Yes

PROFINET CBA (at set setpoint communication load)

• ● Setpoint for the CPU communication load

50 %

• ● Number of remote interconnection partners

32

• ● Number of functions, master/slave

30

• ● Total of all master/slave connections

1 000

• ● Data length of all incoming connections master/slave, max.

4 000 byte

• ● Data length of all outgoing connections master/slave, max.

4 000 byte

• ● Number of device-internal and PROFIBUS interconnections

500

• ● Data length of device-internal und PROFIBUS interconnections, max.

4 000 byte

• ● Data length per connection, max.

1 400 byte

Remote interconnections with acyclic transmission

• — Sampling frequency: Sampling time, min.

500 ms

• — Number of incoming interconnections

100

• — Number of outgoing interconnections

100

• — Data length of all incoming interconnections, max.

2 000 byte

• — Data length of all outgoing interconnections, max.

2 000 byte

• — Data length per connection, max.

1 400 byte

Remote interconnections with cyclic transmission

• — Transmission frequency: Transmission interval, min.

10 ms

• — Number of incoming interconnections

200

• — Number of outgoing interconnections

200

• — Data length of all incoming interconnections, max.

2 000 byte

• — Data length of all outgoing interconnections, max.

2 000 byte

• — Data length per connection, max.

450 byte

HMI variables via PROFINET (acyclic)

• — Number of stations that can log on for HMI variables (PN OPC/iMap)

3; 2x PN OPC/1x iMap

• — HMI variable updating

500 ms

• — Number of HMI variables

200

• — Data length of all HMI variables, max.

2 000 byte

PROFIBUS proxy functionality

• — supported

Yes

• — Number of linked PROFIBUS devices

16

• — Data length per connection, max.

240 byte; Slave-dependent

Number of connections

• ● overall

16

• ● usable for PG communication

15

• — reserved for PG communication

1

• — adjustable for PG communication, min.

1

• — adjustable for PG communication, max.

15

• ● usable for OP communication

15

• — reserved for OP communication

1

• — adjustable for OP communication, min.

1

• — adjustable for OP communication, max.

15

• ● usable for S7 basic communication

14

• — reserved for S7 basic communication

0

• — adjustable for S7 basic communication, min.

0

• — adjustable for S7 basic communication, max.

14

• ● usable for S7 communication

14

• — reserved for S7 communication

0

• — adjustable for S7 communication, min.

0

• — adjustable for S7 communication, max.

14

• ● total number of instances, max.

32

• ● usable for routing

X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.

S7 message functions

Number of login stations for message functions, max.

16; Depending on the configured connections for PG/OP and S7 basic communication

Process diagnostic messages

Yes

simultaneously active Alarm-S blocks, max.

300

Test commissioning functions

Status block

Yes; Up to 2 simultaneously

Single step

Yes

Number of breakpoints

4

Status/control

• ● Status/control variable

Yes

• ● Variables

Inputs, outputs, memory bits, DB, times, counters

• ● Number of variables, max.

30

• — of which status variables, max.

30

• — of which control variables, max.

14

Forcing

• ● Forcing

Yes

• ● Forcing, variables

Inputs, outputs

• ● Number of variables, max.

10

Diagnostic buffer

• ● present

Yes

• ● Number of entries, max.

500

• — adjustable

No

• — of which powerfail-proof

100; Only the last 100 entries are retained

• ● Number of entries readable in RUN, max.

499

• — can be set

Yes; From 10 to 499

• — preset

10

Service data

• ● can be read out

Yes

Ambient conditions

Ambient temperature during operation

• ● min.

0 °C

• ● max.

60 °C

Configuration

Configuration software

• ● STEP 7

Yes; V5.5 or higher

Programming

• ● Command set

see instruction list

• ● Nesting levels

8

• ● System functions (SFC)

see instruction list

• ● System function blocks (SFB)

see instruction list

Programming language

• — LAD

Yes

• — FBD

Yes

• — STL

Yes

• — SCL

Yes

• — CFC

Yes

• — GRAPH

Yes

• — HiGraph®

Yes

Know-how protection

• ● User program protection/password protection

Yes

• ● Block encryption

Yes; With S7 block Privacy

Dimensions

Width

40 mm

Height

125 mm

Depth

130 mm

Weights

Weight, approx.

340 g

概述

• CPU 具有中等規模的程序存儲器和程序框架
• 對二進制和浮點數運算具有較高的處理能力
• 在具有集中式和分布式I/O的生產線上作為集中式控制器使用
• 在PROFINET上實現基于組件的自動化
• PROFINET 代理，用于基于部件的自動化（CBA）中的 PROFIBUS DP 智能設備
• PROFINET I/O 控制器，用于在PROFINET上運行分布式I/O
• 用于 2 端口交換機的 PROFINET 接口
• 組合 MPI/PROFIBUS DP-主/從接口
• 在PROFIBUS上實現等時模式

CPU 運行需要 SIMATIC 微存儲卡(MMC)

應用

CPU 315-2 PN/DP 具有中等規模程序量.除了分布式I/O結構，它還可用于分布式自動化結構?？稍赟IMATIC S7-300中用作PROFINET IO控制器以及標準PROFIBUS DP主站。CPU 315-2 PN/DP還可用作分布式智能從站(DP從站)。

CPU 315-2 PN/DP為采用軟件來實現一些簡單的工藝任務提供了一個理想的平臺，例如：

• Easy Motion Control 運動控制
• 使用 STEP 7 塊或運行軟件“標準/模塊化PID控制” 來實現閉環控制任務的解決方案

使用 SIMATIC S7-PDIAG 進行擴展過程診斷。

無需其他組件，通過CPU的集成組合就可以實現網絡自動化解決方案。

設計

CPU 315-2 PN/DP 裝配有：

• 微處理器;
  處理器處理每條二進制指令執行時間約為 50 ns，每條浮點數運行指令約為 450ns。
• 384 KB 主存儲器（相當于大約 128 K 條指令）；
  與程序組件執行相關的大容量工作存儲器為用戶程序提供了充分的空間。作為程序裝載存儲器的微型存儲卡（zui大為 8 MB）也允許將可以項目（包括符號和注釋）保存在 CPU 中。裝載存儲器還可用于數據歸檔和配方管理。
• 靈活的擴展；
  多達 32 個模塊，（４ 層結構）
• MPI/DP 組合接口；
  *個集成的 MPI/DP 接口zui多能同時建立 16 個與 S7-300/400的連接或與編程器、PC 和 OP 的連接。 在這些連接中，始終分別為 PG 和 OP 各保留一個連接。
  MPI 可以通過“全局?jǐn)?shù)據通訊”與zui多32個CPU組建簡單的網絡。
  該接口可從MPI接口重新設置為DP接口。
  PROFIBUS DP 接口:
  DP 接口可用作 DP 主站或 DP 從站運行。在該接口上，PROFIBUS DP從站可在等時模式下運行．全面支持 PROFIBUS DP V1 標準。這將增加 DP V1 標準從站在診斷和參數賦值能力的范圍。
• 以太網接口；
  CPU 315-2 PN/DP 的第 2 個內置接口是一個基于以太網 TCP/IP 的 PROFINET 接口，帶有雙端口交換機。
  它支持下列協議：
  • S7通訊用于在SIMATIC控制器間進行數據通訊;
  • 通過 STEP 7 進行編程、啟動和診斷的 PG/OP 通訊;
  • 與HMI和SCADA連接的PG/OP通訊;
  • 在PROFINET上實現開放的TCP/IP、UDP和ISO-on-TCP (RFC1006)通訊；
  • SIMATIC NET OPC-Server用于與其它控制器以及CPU自帶的I/O設備進行通訊

功能

• 口令保護;
  用戶程序使用密碼保護，可防止非法訪問。
• 診斷緩沖;
  zui后500個故障和中斷事件保存在該緩沖區中，供診斷使用。
• 免維護的數據后備;
  在電源恢復后，CPU 自動保存所有數據（zui大128KB），當重新上電后，可繼續保留這些數據。

可參數化的特性

可以使用 STEP 7 對 S7 的組態、屬性以及CPU的響應進行參數設置：

• MPI多點接口;
  定義站地址
• 啟動；
  定義 CPU 的啟動特性
• 同步循環中斷；
  設置 DP 主站系統、過程映像分區編號和延時時間
• 循環/時鐘存儲器；
  zui大循環時間和負載。設置時鐘存儲器地址
• 保持性；
  設置保持區
• 時鐘中斷;
  設定起始日期、起始時間和間隔周期
• 看門狗中斷；
  周期設定
• 系統診斷；
  定義診斷報警的處理和范圍
• 時鐘；
  設定AS內或MPI上的同步類型
• 防護等級；
  定義程序和數據的訪問權限
• 通訊；
  保留連接源
• Web；
  CPU 的 Web 服務器設置
• PROFIBUS DP 主站/從站接口;
  為分布式 I/O 分配用戶地址。
• PROFINET 接口；
  使用 NTP 處理時間同步參數

顯示功能與信息功能

• 狀態和故障指示；
  發光二極管顯示，例如，硬件、編程、定時器、I/O、總線故障以及運行狀態，如RUN、STOP、Startup。
• 測試功能；
  可使用編程器顯示程序執行過程中的信號狀態，可以不通過用戶程序而修改過程變量，以及輸出堆棧內容。
• 信息功能；
  通過編程器以文本形式為用戶提供存儲能力信息、CPU的運行模式，以及工作存儲器和裝載存儲器當前的使用情況、當前的循環時間和診斷緩沖區的內容。

集成的通訊功能

• 編程器/OP 通訊
• 全局?jǐn)?shù)據通訊
• S7 基本通訊
• S7 通訊
• S5可兼容通訊
• 路由
• 數據記錄路由
• PROFIBUS DP 主站/從站
• 通過 TCP/IP、ISO-on-TCP 和 UDP 進行開放式通訊
• PROFINET IO 控制器
• PROFINET CBA（基于組件的自動化）
• Web 服務器

系統功能

CPU 具有廣泛的系統功能特性，諸如：診斷、參數賦值、報警、定時和測量等。

詳細信息請參見手冊。

技術規范