德國GSR先導閥的特點:功率消耗低、通徑較大,而結構簡單、安裝方向任意,但只能用于電磁閥兩端有一定壓差的場合,主要應用在汽車,電廠,鋼廠,船廠等行業。產品應用廣泛,質量保證。咨詢!
GSR先導閥是一種先導閥與主閥兩者有通道相,當電磁閥線圈通電,動鐵芯與靜鐵芯吸合使導閥孔開放,閥芯背腔的壓力通過導閥孔流向出口,此時閥芯背腔的壓力低于進口壓力,利用壓差使閥芯脫離主閥口,介質從進口流向出口。當線圈斷電,動鐵芯與靜鐵芯脫離,關閉了導閥孔,閥芯背腔壓力受進口壓力的補充逐漸趨于和進口平衡,閥芯因彈簧力作用下把閥門緊密關閉。 特點:功率消耗低、通徑較大,而結構簡單、安裝方向任意,但只能用于電磁閥兩端有一定壓差的場合,主要應用在汽車,電廠,鋼廠,船廠等行業。
GSR電磁閥,GSR先導閥
選型依據:
1、根據管道參數選擇電磁閥的:通徑規格(即DN)、接口方式
1)按照現場管道內徑尺寸或流量要求來確定通徑(DN)尺寸;
2)接口方式,一般>DN50要選擇法蘭接口,≤DN50則可根據用戶需要自由選擇。
2、根據流體參數選擇電磁閥的:材質、溫度組
1)腐蝕性流體:宜選用耐腐蝕電磁閥和全不銹鋼;食用超凈流體:宜選用食品級不銹鋼材質電磁閥;
2)高溫流體:要選擇采用耐高溫的電工材料和密封材料制造的電磁閥,而且要選擇活塞式結構類型的;
3)流體狀態:大至有氣態,液態或混合狀態,特別是口徑大于DN25時一定要區分開來;
4)流體粘度:通常在50cSt以下可任意選擇,若超過此值,則要選用高粘度電磁閥。
德國gsr先導閥中國
部分型號:
D2206/0501/8005-MAEZ DIN2526 PN25 DN50 with Flange
50-DR7521 DIN2526 PN25 DN50 with Flange
E2406/0504/T272-TE 220VAC DN50 PN1.6MPa
D2206/0501/8005-MAEZ DIN2526 PN16 DN50 with Flange
A0306/0804-MSEZ DIN2526 PN25 DN50 with Flange
50-DR7521-1290 DIN2526 PN25 DN80 with Flange
D2206/0501/7005-MAEZ DIN2526 PN25 DN50 with Flange
A7423/0801/1.48-MS24V.DC
50-DR7521-1190 DIN2526 PN25 DN50 with Flange
AU611165 K0511890
B4028/1006/0032
4825/0802/.248-FC 0-0.5bar G1 Stainless steel
B4026/1001/023,DN32mm,24VDC,24/15VA,F,1.2Mp-1.6Mp,IP65,G5/4"
AU611165 K0511890
AU610549 D40250801.032XX
A52401002.012N0 G1/4
AU610549 D40250801.032XX Pressure:0.3-20Bar G1 DN25 Serial:09.06 Voltage:230V 50-60HZ
AU439615 D24V DN25
C24070801.242
GO0705505
K0511810 24V 6.8W 48V 50/60HZ 10.5VA
TYP:4028 DN50 24V
AU 303975 A72311002.148 pressure 0-10bar G1/8 DN1.5 ,type:03.02, 230V 50HZ
K3.1 DIAPHRAM ASSY FOR D4028.1001.182.DC24V
D4025.1001.182-DC24V
D4028.1001.182-DC24V
D2404/0501/.278, DN32
D2404/0501/.278, DN32
A4825/1001/.322-QX , 24V
B4327/1001/.322-HA ,24V
K0513240(8.2956.016)
A46230911.322XX
DN40/PN16D2205/0402/7505_LK
DN32/PN16D2204/0402/7505_LK
A51231001.182XX
D4022/1002/.182,G3/8"
D4025/1002/.182,1-25,0.3-16bar
B4028/1001/.032,G2"
D4023/1002/.182,0.3-20
D4326/1002/.322,G11/4"-40,0-10Ba
B4028/1002/.032,0.5-16
G00702181G046.000519.042.009.04B46230801.702XXG1/2220VDC
G01004683 G075.000136.090.099.090 0-20BAR G1/4 230VAC
A5230 1004012,G1/8 24VAC
K0510110
AU700004 A52401004.012XX Pressure:0-150bar G1/4 Serial :03.30 Voltage:24vdc K0510110 24V-18.5W100% ED
A5230 1004012,G1/4 230VAC
coil for K0582490 NR.AL03149 192 230V 40-60HZ 0.13A 30W AU300835 B48250802 247E8 0-0.7BAR G1 02 03 230V 50-60HZ
K0582490 NR.AL03149 192 230V 40-60HZ 0.13A 30W AU300835 B48250802 247E8 0-0.7BAR G1 02 03 230V 50-60HZ
A5242/1002/012 24V
A5245/1002/012 DC24V
A5245
A5242/1002/012 24V
G048.000107.090.099.090
K0513210
B43261001.322EJ
A72401002.012XX 0-50BAR
K0510110(DC24)
25199005670,K0511810 24V 6.8W
GO0900004 DC24V
德國gsr先導閥中國